Skip to content

NitroTek

A-10 THUNDERBOLT II RTF 4CH RC BRUSHLESS SCALE MODEL JET 2.4G

  • Wing span
  • 872mm
  • Length
  • 968mm
  • Flying Weight
  • 450g
  • Drive
  • Twin brushless motors 1200KV
  • Speed Controller
  • 25A brushless ESC
  • Servo
  • 3x10g
  • Battery
  • 11.1V 15C 1500MAH Li-Po
  • Charger
  • Li-Po balance charger
  • Control
  • 4 CH 2.4GHz Radio Tx and Rx

      ,
    , ,
      ,
    • 4 CH Full RC - Aileron, Elevator, Wheel, Throttle
    • ,
    • Upgraded 2.4Ghz Radio Equipment
    • ,
    • Twin Brushless Motors
    • ,
    • Full aerobatic characteristics 
    • ,
    • Powerful brushless motors
    • ,
    • Excellent stability
    • ,
    • Ready to Fly in Just Minutes!
    • ,
    • Super tough & Lightweight
    • ,
    • Shock Resistant Fuselage
    • ,
    • Pre-installed Electronics 
    • ,
    • Suitable for beginners and experts
    • ,
    • Only required 8 AA batteries for the transmitter to start flying
    • ,
    • 10-15 minutes flight time
    • ,
    ,

    The A-10 Thunderbolt II (Warthog) comes with all electronics and ...

    NitroTek

    WASP V4 BELT 250 RTF 2.4G RC HELICOPTER

  • Main Rotor Diameter
  • 470mm
  • Length
  •  460mm
  • Flying Weight
  • 330g
  • Driven system
  • Skyartec 4500KV brushless motor
  • Gyro
  • Sky600 Head Lock
  • Serv
  • 3X Skyartec 9g + 1X Skyartec 5g
  • ESC
  • Skyartec 18A
  • Battery
  • Skyartec 11.1V 900mAh Lithium Li-Po

      ,
    , ,
      ,
    • Completely assembled and tested at the factory.
    • ,
    • 120 degree eCCPM control system.
    • ,
    • New high-tech 7-channel 2.4Ghz RC system
    • ,
    • High performance head lock gyro is capable of sport flying and 3D aerobatics.
    • ,
    • Digital sub-micro servos and micro head lock gyro offer precise and powerful control.
    • ,
    • Stainless steel fly bar, main shaft and tail shaft.
    • ,
    • 4500KV brushless motor, 18A brushless ESC and 3S 11.1V 900mAh 20C Li-Po battery deliver incredible power and performance.
    • ,
    • Auto-rotation system
    • ,
    • Belt drive system
    • ,
    • High inertial main blade
    • ,
    • Shock proof iron landing skids
    • ,
    • Full ball bearings and metal ball ends
    • ,
    • Strong carbon fibre tail stand
    • ,
    • Training set included
    • ,
    • Spare main rotor blades included
    • ,
    ,

    Skyartec's new flagship model is the Wasp V4 Belt 250. ...

    NitroTek

    CONQUISTADOR NITRO RC MONSTER TRUCK

  • Width
  • 330MM
  • Height
  • 165MM
  • Track
  • 267MM
  • Length
  • 390MM
  • Wheel base
  • 280MM
  • Gear ratio
  • 10.44
  • Engine
  • Team Infinity 18
  • Wheel dia.
  • 108*56MM
  • Ground clearance (F/R)
  • 38MM/46MM

      ,
    , ,
      ,
    • 1/10 Scale nitro powered car
    • ,
    • 4WD Shaft drive system
    • ,
    • Infinity 18 size pull start engine
    • ,
    • Oil-filled Alluminium shocks
    • ,
    • Single speed gear box
    • ,
    • Front and rear bevel differentials
    • ,
    • 75CC Fuel tank
    • ,
    • Metal disc brake system
    • ,
    • Pre-painted and cut body shell
    • ,
    • Sealed box for protecting receiver system
    • ,
    • High quality 27MHZ CE approved Radio system with changeable crystals.
    • ,
    ,

    Unstoppable power allows this off road truck to go where ...

    NitroTek

    CONQUISTADOR SPECIAL EDITION NITRO RC TRUCKS

    standard Conquistador and ..." />

  • Width
  • 330MM
  • Height
  • 165MM
  • Track
  • 267MM
  • Length
  • 390MM
  • Wheel base
  • 280MM
  • Gear ratio
  • 10.44
  • Engine
  • Team Infinity 18
  • Wheel dia.
  • 108*56MM
  • Ground clearance (F/R)
  • 38MM/46MM

      ,
    , ,
      ,
    • Fully Upgraded Special Edition!
    • ,
    • 1/10 Scale nitro powered car
    • ,
    • 4WD Shaft drive system
    • ,
    • Infinity 18 size pull start engine
    • ,
    • Oil-filled Alluminium shocks
    • ,
    • Single speed gear box
    • ,
    • Front and rear bevel differentials
    • ,
    • 75CC Fuel tank
    • ,
    • Metal disc brake system
    • ,
    • Pre-painted and cut body shell
    • ,
    • Sealed box for protecting receiver system
    • ,
    • High quality 27MHZ CE approved Radio system with changeable crystals.
    • ,
    ,

    We have taken a standard Conquistador and ...

    NitroTek

    CYCLONE SELF BUILD NITRO RC CAR KIT

  • Width
  • 199MM
  • Height
  • 115MM
  • Track
  • 185MM
  • Length
  • 380MM
  • Wheelbase
  • 259MM
  • Gear ratio
  • 8.35
  • Engine
  • New Powerful Team Infinity 18
  • Wheel dia.
  • 64*26MM
  • Ground clearance
  • 8.5MM

      ,
    , ,
      ,
    • 1/10 Scale nitro powered car
    • ,
    • 4WD Shaft drive system
    • ,
    • Japanese high quality pull start engine
    • ,
    • Oil-filled shocks
    • ,
    • Powerful .18 engine
    • ,
    • Front and rear bevel differentials
    • ,
    • 75CC Fuel tank
    • ,
    • Metal disc brake system
    • ,
    • Pre-painted exclusive body shell
    • ,
    • Sealed box for protecting receiver system
    • ,
    • High quality 27MHZ CE approved Radio system with changeable crystals.
    • ,
    ,

    By popular demand we are now stocking a range of ...

    NitroTek

    CONDOR SELF BUILD NITRO RC BUGGY KIT

  • Width
  • 267MM
  • Height
  • 155MM
  • Track
  • 240MM
  • Length
  • 430MM
  • Wheelbase
  • 280MM
  • Gear ratio
  • 8.35
  • Engine
  • Team Infinity .18
  • Wheel dia.
  • 88*34MM(FRONT); 88*41MM(REAR)
  • Ground clearance
  • 27MM

      ,
    , ,
      ,
    • 1/10 Scale nitro radio controlled buggy
    • ,
    • 4WD Shaft drive system
    • ,
    • Infinity powerful .18 pull start engine
    • ,
    • Oil-filled shocks
    • ,
    • Front and rear bevel differentials
    • ,
    • 75CC Fuel tank
    • ,
    • Metal disc brake system
    • ,
    • Pre-painted body shell
    • ,
    • Sealed box for protecting receiver system
    • ,
    • High quality 27MHZ CE approved Radio system with changeable crystals.
    • ,
    ,

    By popular demand we are now stocking a range of ...

    NitroTek

    WEREWOLF 1/8 BRUSHLESS ELECTRIC RC BUGGY - STANDARD VERSION

  • Height
  • 185mm
  • Length
  • 505mm
  • Width
  • 310mm
  • Wheel base
  • 315~320mm
  • Track F/R
  • 310mm
  • Ground clearance
  • 30mm
  • Weight
  • 3000g
  • Radio
  • 2.4Ghz Pistol Type
  • Battery
  • 11.1V Li-Po With Charger
  • Motor
  • Brushless with ESC

      ,
    • Scale: 1:8
    • ,
    , ,
      ,
    • 1/8 Scale brushless powered car
    • ,
    • Extreme High Speeds
    • ,
    • 2.4G Radio Equipment
    • ,
    • 4WD Shaft drive system
    • ,
    • 3 diff. shaft drive 4WD
    • ,
    • 2.5mm aluminium chassis
    • ,
    • 3mm F/R Alum. shock tower;
    • ,
    • High-torque metal geared steering servo
    • ,
    • Front universal drive shafts (pro version)
    • ,
    • All linkages set with adjustable turnbuckles
    • ,
    • Option for four disc brake system
    • ,
    • Brushless motor, brushless ESC
    • ,
    • Li-Po battery and balanced charger
    • ,
    • Plus many more. See below images for rest of features.
    • ,
    ,

    This is our highest spec electric rc car. Designed with ...

    NitroTek

    FIRE WOLF ELECTRIC BRUSHLESS RC BUGGY

  • Width
  • 187mm
  • Height
  • 108mm
  • Length
  • 232mm
  • Track
  • 126mm
  • Wheelbase
  • 177mm
  • Gear ratio
  • 10.86
  • Tyres
  • 70mm
  • Ground clearance
  • 18mm
  • Transmitter
  • 2ch FM

      ,
    , ,
      ,
    • Fully assembled ready to run
    • ,
    • High speed model - 40+ Mph
    • ,
    • Fully ball raced
    • ,
    • Powerful brushless motor
    • ,
    • 11.1v Li-po battery
    • ,
    • Front/rear metal differentials
    • ,
    • Aluminium drive shafts
    • ,
    • Sway bar as standard
    • ,
    • Adjustable camber
    • ,
    • Adjustable oil filled shocks
    • ,
    • Highly adjustable for race tuning
    • ,
    • 4WD shaft driven system
    • ,
    • Slipper system
    • ,
    • Aluminium chassis
    • ,
    ,

    There is only one way to best describe this brushless ...

    NitroTek

    PIONEER ELECTRIC BRUSHLESS RC TRUGGY

  • Width
  • 205mm
  • Height
  • 110mm
  • Length
  • 260mm
  • Track
  • 165mm
  • Wheelbase
  • 180mm
  • Gear ratio
  • 10.86
  • Tyres
  • 73mm x 39.5mm
  • Ground clearance
  • 25mm Transmitter

      ,
    , ,
      ,
    • Fully assembled ready to run 
    • ,
    • High speed model - 40+ Mph 
    • ,
    • Fully ball raced 
    • ,
    • Powerful brushless motor 
    • ,
    • 11.1v Li-po battery 
    • ,
    • Front/rear metal differentials 
    • ,
    • Aluminium drive shafts 
    • ,
    • Sway bar as standard 
    • ,
    • Adjustable camber 
    • ,
    • Adjustable oil filled shocks 
    • ,
    • Highly adjustable for race tuning 
    • ,
    • 4WD shaft driven system 
    • ,
    • Slipper system 
    • ,
    • Aluminium chass
    • ,
    ,

    There is only one way to best describe this brushless ...

    NitroTek

    BULLET ELECTRIC BRUSHLESS RC BUGGY

  • Width
  • 260MM 
  • Height
  • 140MM 
  • Length
  • 390MM 
  • Wheelbase
  • 280MM 
  • Gear ratio
  • 8.95
  • Wheel diameter.
  • 80*30MM 
  • Ground clearance
  • 25MM 
  • Radio
  • FM 27mhz Pistol Type 
  • Battery
  • 11.1V 1800mah Li-Polymer
  • Motor
  • Brushless 2399kv
  • ESC
  • 25A Brushless

      ,
    • Scale: 1:10
    • ,
    , ,
      ,
    • 1/10 Scale brushless powered car
    • ,
    • 4WD Shaft drive system
    • ,
    • Fully ball raced
    • ,
    • High torque servo
    • ,
    • Extreme power brushless motor
    • ,
    • Oil-filled shocks
    • ,
    • Powerful Li-Polymer battery with balanced charger
    • ,
    • Front and rear bevel differentials
    • ,
    • Brushless ESC
    • ,
    • Pre-painted exclusive body shell
    • ,
    • High quality FM 27MHZ CE approved Radio system with changeable crystals.
    • ,
    ,

    The Bullet buggy is a high performance, high speed machine. ...

    NitroTek

    1/24 AIRSOFT BB M1A2 BATTLE RC TANKS

  • Speed
  • 5-10 MPH

      ,
    • Equipped with BB firing motor air gun.
    • ,
    • Turret can turn to both sides and gun can go up and down. 
    • ,
    • All driving wheels suspension system. 2-Level Forward Speed Control. 
    • ,
    • Forward, Backward, Spin, Super Spin. 
    • ,
    • Equipped with High Gripping Caterpillar. 
    • ,
    • Tank Fighting Possible (Run up to 3 tanks at a time) 
    • ,
    • Running Time up to 60 minutes. 
    • ,
    • Length - 41cm
    • ,
    , ,
      ,
    • Very low price
    • ,
    • Rechargeable battery pack w/ charger
    • ,
    ,

    The M1 Abrams is a modern tank that entered U.S. ...

    NitroTek

    1/16 TIGER I RC TANK WITH SMOKE AND SOUND

  • Storage Capacity
  • 40 BB's 
  • Length
  • 52 cm
  • Width
  • 24 cm
  • Height
  • 20 cm
  • Climbing Gradient
  • (Changeable on different road surfaces) Apr. 35-degree

      ,
    • Scale: 1:16
    • ,
    , ,
      ,
    • Built in realistic smoke generator
    • ,
    • Highly detailed realistic model
    • ,
    • Demonstration mode
    • ,
    • Frequencies can be changed so multiple tanks can be used together
    • ,
    • Super chassis, realistic suspension system, rubber covered wheels, pre-assembled tracks 
    • ,
    • A realistic commander is included
    • ,
    • Rotating turret
    • ,
    • Gun can be moved 30 degrees up and down
    • ,
    • Full control of tank movement - forward, backward, rotate left and right
    • ,
    • Many sound effects - Emulation music, motor start-up sound, Engine sound, machine-gun sound, Cannonball sound
    • ,
    • Adjustable sound
    • ,
    ,

    The Tiger I was a German heavy tank used in ...

    NitroTek

    1/16 TAUCHPANZER RC TANK WITH SMOKE AND SOUND

  • Storage Capacity
  • 40 BB's 
  • Length
  • 34 cm
  • Width
  • 19 cm
  • Height
  • 14 cm
  • Climbing Gradient
  • (Changeable on different road surfaces) Apr. 35-degree

      ,
    • Scale: 1:16
    • ,
    , ,
      ,
    • Built in realistic smoke generator
    • ,
    • Highly detailed realistic model
    • ,
    • Demonstration mode
    • ,
    • Frequencies can be changed so multiple tanks can be used together
    • ,
    • Super chassis, realistic suspension system, rubber covered wheels, pre-assembled tracks 
    • ,
    • A realistic commander is included
    • ,
    • Rotating turret
    • ,
    • Gun can be moved 30 degrees up and down
    • ,
    • Full control of tank movement - forward, backward, rotate left and right
    • ,
    • Many sound effects - Emulation music, motor start-up sound, Engine sound, machine-gun sound, Cannonball sound
    • ,
    • Adjustable sound
    • ,
    ,

    The Tauchpanzer III was a version of the Panzer III ...

    NitroTek

    1/16 RUSSIAN KV-1 RC TANK WITH SMOKE AND SOUND

  • Storage Capacity
  • 40 BB's 
  • Length
  • 42.5 cm
  • Width
  • 20.6 cm
  • Height
  • 17cm
  • Climbing Gradient
  • (Changeable on different road surfaces) Apr. 35-degree

      ,
    • Scale: 1:16
    • ,
    , ,
      ,
    • Built in realistic smoke generator
    • ,
    • Highly detailed realistic model
    • ,
    • Demonstration mode
    • ,
    • Frequencies can be changed so multiple tanks can be used together
    • ,
    • Super chassis, realistic suspension system, rubber covered wheels, pre-assembled tracks 
    • ,
    • A realistic commander is included
    • ,
    • Rotating turret
    • ,
    • Gun can be moved 30 degrees up and down
    • ,
    • Full control of tank movement - forward, backward, rotate left and right
    • ,
    • Many sound effects - Emulation music, motor start-up sound, Engine sound, machine-gun sound, Cannonball sound
    • ,
    • Adjustable sound
    • ,
    ,

    The 45 tonnes Kliment Voroshilov (KV) tanks were a series ...

    NitroTek

    1/16 JAGDPANTHER RC TANK WITH SMOKE AND SOUND

  • Storage Capacity
  • 40 BB's 
  • Length
  • 60cm
  • Width
  • 19cm
  • Height
  • 17cm
  • Climbing Gradient
  • (Changeable on different road surfaces) Apr. 35-degre

      ,
    • Scale: 1:16
    • ,
    , ,
      ,
    • Built in realistic smoke generator
    • ,
    • Highly detailed realistic model
    • ,
    • Demonstration mode
    • ,
    • Frequencies can be changed so multiple tanks can be used together
    • ,
    • Super chassis, realistic suspension system, rubber covered wheels, pre-assembled tracks 
    • ,
    • A realistic commander is included
    • ,
    • Rotating turret
    • ,
    • Gun can be moved 30 degrees up and down
    • ,
    • Full control of tank movement - forward, backward, rotate left and right
    • ,
    • Many sound effects - Emulation music, motor start-up sound, Engine sound, machine-gun sound, Cannonball sound
    • ,
    • Adjustable sound
    • ,
    ,

    The Jagdpanther was a tank destroyer built by Nazi Germany ...

    BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby